Free Newsletters - Space - Defense - Environment - Energy
..
. Nano Technology News .




NANO TECH
Stanford engineers show how to optimize carbon nanotube arrays for use in hot spots
by Staff Writers
Stanford CA (SPX) Dec 08, 2013


This is a stylized rendition of single walled carbon nanotubes that are just one atom thick in diameter. The red zones show where the attraction caused by van der Waals forces has bent or "zipped" two adjacent CNTs together. Credit: Image courtesy of Alex Jerez.

When engineers design devices, they must often join together two materials that expand and contract at different rates as temperatures change. Such thermal differences can cause problems if, for instance, a semiconductor chip is plugged into a socket that can't expand and contract rapidly enough to maintain an unbroken contact over time.

The potential for failure at such critical junctures has intensified as devices have shrunk to the nano scale, bringing subtle forces into play that tug at atoms and molecules, causing strains that are difficult to observe, much less avoid.

Writing in the Proceedings of the National Academy (PNAS), Stanford engineers report on how to create carbon nanotube structures that remain strong and supple at these critical interfaces where thermal stress is intrinsic to the design.

"Think about the heat sink for a microprocessor, " said senior PNAS author Kenneth Goodson, Professor and Bosch Chair of Mechanical Engineering at Stanford.

"It is exposed to high heat fluxes for long periods of time, and repeated instances of heating and cooling."

At present materials like solder and gels have been used at such junctions. But as electronics continue to shrink, more electrical power gets pushed through smaller circuits, putting materials under ever increasing thermal stress.

"Solder has high thermal conductivity, but it's stiff," Goodson said, explaining why his lab continues to experiment with single-walled carbon nanotubes. Just before this PNAS contribution, his team described the favorable thermal properties of nanotubes in an article for Reviews of Modern Physics (Vol. 85, pp. 1296-1327).

Nanotubes are infinitesimally thin strands of carbon atoms that have the potential to be efficient at conducting heat. They are also strong for their size, and can be flexible depending on how they are fabricated.

The Stanford PNAS paper was based on experiments and simulations designed to reveal how to create carbon nanotube structures (CNTs) with the optimal blend of all three characteristics - strength, flexibility, and heat conductivity - that are required in critical junctures where thermal stress is a fact of life.

The Stanford paper represents about five years of teamwork centered in the Stanford Mechanical Engineering Department including experiments led by first author Yoonjin Won, who was then a doctoral student in mechanical engineering.

She used a variety of existing techniques to assemble CNTs with different structural characteristics, and then measured the flexibility (also called modulus) and thermal conductivity of each structure to look for the optimal structure.

Left to nature, the carbon atoms that form CNTs will create structures that - if we could see them -- resemble a bowl of spaghetti.

But Won worked with collaborators at the University of Tokyo to create CNTs that grew up relatively straight, like grasses. Some degree of entanglement still occurred. Precise control of CNT growth remains beyond the reach of science.

Nevertheless, Won's experiments showed that longer CNTs, grown less densely together, seemed to have the best combination of flexibility, heat conductivity and strength, for use in electronics and other industrial applications where thermal stress is expected.

To some degree her findings represent a tradeoff. Denser, shorter CNT structures are stronger and more efficient at dissipating heat. But they are also more entangled and stiffer. Won's experimental results showed that as CNT strands grew longer, they tended to grow straighter and were less tangled, which increased the flexibility of the structure, albeit with some acceptable losses in the other two parameters.

Because the ultimate goal of this work is to reveal how to optimize CNT structures for use as thermal transfer materials, the Stanford team built a computer simulation of the CNT assembly process with an eye toward understanding how the CNTs became bent and entangled despite efforts to grow them straight.

Work on the simulation was led by Wei Cai, an Associate Professor of mechanical engineering at Stanford, who holds a courtesy appointment in materials science and engineering. The Stanford scientists wanted to understand the manner in which van der Waals forces influence the growth of CNTs.

These forces are named for the Dutch physicist who first described the weak attractions that exist between molecules - attractions that could not be explained by other known forces such as the chemical bonds that result when atoms share electrons.

Cai said that whereas van der Waals forces may not be critical in other types of structures, carbon nanotubes are so thin -- a mere atom or so thick in diameter -- that these minute forces could fundamentally affect them.

That is in fact what the simulation showed. Imagine a CNT attempting to grow straight, only to be bent to one side by the van der Waal attraction of another CNT crossing near its top, and perhaps bent to the other side by a different CNT that nears its bottom.

Taken together, the experimental results and computer simulation reinforce the findings that longer, less entangled CNTs would offer the best mixture of the desired characteristics strength, flexibility and heat transfer. But due to the van der Waals forces operating on these atom-thick carbon tubes, engineers are going to have to accept some bending and irregularity as they strive to create workable, though less than ideal, structures for dissipating heat.

"When you hear about nanotechnology it's usually about the superlatives, the strongest this, the thinnest," Goodson said. "But we think is the answers will lie in finding the right combinations of properties, something that's strong and conducts heat like a metal, but can flex and bend as well."

Other contributors include Yuan Gao, Matthew Panzer and Thomas Kenny, who did their work at Stanford University; Rong Xiang, with the School of Physics and Engineering at Sun Yat-sen University in China; and Shigeo Maruyama with the Department of Mechanical Engineering at the University of Tokyo. The work was sponsored by the Office of Naval Research, the National Science Foundation and the Semiconductor Research Corporation. Tom Abate is the Associate Director of Communications at Stanford Engineering.

.


Related Links
Stanford School of Engineering
Nano Technology News From SpaceMart.com
Computer Chip Architecture, Technology and Manufacture






Comment on this article via your Facebook, Yahoo, AOL, Hotmail login.

Share this article via these popular social media networks
del.icio.usdel.icio.us DiggDigg RedditReddit GoogleGoogle




Memory Foam Mattress Review
Newsletters :: SpaceDaily :: SpaceWar :: TerraDaily :: Energy Daily
XML Feeds :: Space News :: Earth News :: War News :: Solar Energy News



International Conference on Protection of Materials and Structures From Space Environment



NANO TECH
Ultra-sensitive force sensing with a levitating nanoparticle
Barcelona, Spain (SPX) Dec 03, 2013
A recent study led by researchers of the Institute of Photonic Sciences (ICFO) achieved the highest force sensitivity ever observed with a nano-mechanical resonator. The scientific results of this study have been published in Nature Physics. Nano- and micromechanical oscillators with high quality (Q) factors have gained much attention for their potential application in sensing, signal proc ... read more


NANO TECH
Forecast: Growth ahead in military helicopter market

Boeing Partners with US Air Force to Reduce Supply Chain Costs

Northrop Grumman Team Demonstrates Virtual Air Refueling Across Distributed Simulator Locations for USAF

Purdue science balloon, thought lost, makes dramatic return to campus

NANO TECH
More Moon Missions For China

China moon rover enters lunar orbit: Xinhua

Turkey keen on space cooperation with China

China space launch debris wrecks villagers' homes: report

NANO TECH
Raytheon BBN Technologies and GrammaTech collaborate to help U.S. government prevent malware in IT devices

Microsoft leads attack on search traffic thieves

US tech sanctions hurt democracy activists: study

Sound protection standards for secret spaces may be insufficient

NANO TECH
Who Is Keeping the Lights on in California?

The heat is on...or off

French Alstom sues Chinese firm in Bulgaria over patent

India needs $2.1 trillion investment for energy: IEA

NANO TECH
KAIST developed the biotemplated design of piezoelectric energy harvesting device

New thermoelectronic generator

Greensmith Energy offers Turn-key energy storage systems up to megawatt scale

With US ties frayed, Saudi calls for Gulf union

NANO TECH
Researchers Develop World's Highest Quantum Efficiency UV Photodetectors

Raytheon demonstrates unparalleled precision in live-fire testing of self-propelled howitzer

Less than 90 days: how US will destroy Syria chemical weapons

Switzerland, Austria seek U.S. Foreign Military Sales deals

NANO TECH
Laser light at useful wavelengths from semiconductor nanowires

Stanford engineers show how to optimize carbon nanotube arrays for use in hot spots

Oregon scientists offer new insights on controlling nanoparticle stability

Scientists scale terahertz peaks in nanotubes

NANO TECH
NASA Developing Legs for ISS Robonaut 2

Literal Android: Google develops robots to replace people in manufacturing, retail

Robot herder brings the cows in for milking in Australia

Droids dance, dogs nuzzle, humanoids speak at Madrid robot museum




The content herein, unless otherwise known to be public domain, are Copyright 1995-2014 - Space Media Network. AFP, UPI and IANS news wire stories are copyright Agence France-Presse, United Press International and Indo-Asia News Service. ESA Portal Reports are copyright European Space Agency. All NASA sourced material is public domain. Additional copyrights may apply in whole or part to other bona fide parties. Advertising does not imply endorsement,agreement or approval of any opinions, statements or information provided by Space Media Network on any Web page published or hosted by Space Media Network. Privacy Statement